Please register here
All general discussions related to Phoenix Android Radio head units goes here.
- Posts: 1
- Joined: Sun May 16, 2021 2:41 pm
After installation of Px6 9.0 Tesla style navi system the speakers pop when car is started. The volume was loud at the 2 setting. I turned the gain down and that helped with the volume but the initial start up pop is still there. My car-2013 Mustang 5.0 GT with manual a/c, Shaker with sync, with no navigation. My concern is the signal from the unit is not only going through the Shaker amps but also the amp in the unit. It would seem there should be a harness to convert the speaker plug into male RCA’s and hook the speakers up like a system with after market amps. Could the speakers be damaged by not bypassing Shaker amps or the unit amp?