1. phoenixgod
  2. Cadillac
  3. Sunday, 11 August 2019

If the A/C is not working properly, or the unit cannot power on or power off, you may have to get an unused wire (usually a green wire) from the factory A/C harness, and insert the pin of the wire into the position indicated by the red circle in the following picture.

 

phoenix android radio cadillac cts ac fix

 

If the sound is not working, first make sure you have the yellowish connector branched off the main harness connected to the back of the unit. If that is not the issue, then contact Phoenix Android Radio for a proper MCU software (different for with and without BOSE amp).



Accepted Answer Pending Moderation
0
Votes
Undo

Can you be more descriptive and show more pictures on the audio side? this doesnt help much. 

  1. more than a month ago
  2. Cadillac
  3. # 1
Accepted Answer Pending Moderation
1
Votes
Undo

c4lifestyle....on the A/C harness coming from the car, for which phoenixgod shows a picture of the end connection, look for a dark green wire which is folded back and captured under the black electrical wrap.  The fold should be just an inch or two from the end connection.  If you pull the wire out from under the tape, it will already have the electrical pin on it that will insert into the end connection where phoenixgod shows in the picture.

  1. more than a month ago
  2. Cadillac
  3. # 2
Accepted Answer Pending Moderation
0
Votes
Undo

a picture will be helpful

 

 

  1. more than a month ago
  2. Cadillac
  3. # 3
  • Page :
  • 1


There are no replies made for this post yet.
Be one of the first to reply to this post!